PlatinumLED Therapy Lights: BIOMAX Series

First, know that both our BIO and BIOMAX lights are the most powerful lights on the market today. Either choice will deliver maximum therapeutic benefit that far exceeds anything else available.



The BIO series lights are our original, proven design that deliver maximum intensity in a simple to use, economical package. All BIO lights feature simple on/off power switches for ease of use and make a great starting point for LED light therapy. All BIO lights are available in 3 different configurations: All red/660nm, all NIR/850nm or a 50/50 combination of both red/NIR. Thus, you’re able to choose the configuration that is most specific to your therapy goals.



The BIOMAX series lights are our newest and most advanced series of lights that have been developed for users that want even further increased power and advanced spectrum for improved benefit plus the ability to connect multiple panels together to make any custom size panel possible in addition to fully digital controls with built in timer. Also, all BIOMAX lights are compatible with our tabletop stands and wheeled rack stands. All of our BIOMAX models include our patent pending R+ | NIR + spectral output featuring the seven wavelengths of 480nm /630nm /660nm/ 810nm /830nm /850nm/1060nm. Please check out the following article for more information: R+ | NIR+: THE MOST ADVANCED LED THERAPY LIGHT SPECTRUM

This spectral output is perfected for human therapy use as the entire science of human therapy lights is emitting a spectral output that matches as close as possible to the body's own coefficient of spectral absorption. By efficiently emitting as close as possible to what the body will absorb within the studied therapeutic "action zones", we're able to maximize the production of ATP and mitochondrial stimulation. This is the science of red/NIR light therapy.All of our BIOMAX lights do also feature the ability to adjust the intensity level of the red and NIR portions of the array individually so that you may customize your output. In addition to this, BIOMAX panels feature complete independent 480nm/blue LED control with the ability to turn this feature ON/OFF without affecting the other LEDs.

Yes and yes! We ship worldwide and all lights auto-adapt to all voltage levels worldwide with the correct cord/plug type always included for each country.

As a general rule of thumb, we’ve found that 10-20 minutes per treatment area at a distance of around 8”-14” for deep tissue or 16"-24" for superficial facial skin therapy on bare skin with a max of 2-3 treatment areas per day to be a great average usage guideline for basically all applications. We recommend using light therapy at least 3 to 5 times a week for optimal results. We would suggest to start slower/farther at first and then work your way up to the closer distance/longer exposure once your tolerance to the light has been found. We also do recommend caution with using the NIR array on any areas of the body that may have pre-existing hyperpigmentation concerns as this type of light may aggravate this condition. We recommend to use red only on these areas.

There is no readable EMF at 4” or further from our BIOMAX units. Please check the following article for more information : https://platinumtherapylights.com/blogs/news/emf-in-platinumled-therapy-light-devices-what-you-need-to-know

Regarding Bluetooth or any other wireless signal, our lights DO NOT emit any type of signal whatsoever. When placed in REMOTE mode, they have the ability to receive a broadcast wireless signal from a remote control device only. They do not contain any type of transmitter and do not have the ability to emit any type of signal.

No, we do not work with "pulsed" lighting as this is entirely a marketing gimmick with absolutely zero proven benefit in an LED based human therapy light. The only two factors that determine the effectiveness of a light are the power of the output and the spectrum that it is emitting. That's it. That's what creates a therapy light and this is what we deliver in superiority to all other lights. Please refer to the following article for information on Pulsing LEDs: PULSED LIGHT THERAPY: BENEFICIAL OR BOGUS?

First, optional eye protection is included with all lights for our customers that wish to use it. However, this is optional and not required for use. Contrary to many misconceptions and misinformation out there, there is no exact type/frequency of light emitted from our lights that is specifically more or less dangerous that any other type/frequency. What can be harmful to eyes is the intensity of a light.. not the actually type of light that its emitting. For this reason, we ask to please never look directly into the panels due to this intensity. You would take the same precautions with our lights as you would with any other very intense light by not looking directly into them. Many users either close their eyes or look to the sides of the lights while in use.

All BIOMAX lights feature the unique ability to independently digitally control the output intensity of the R+ (red) array and the NIR+ (NIR) array by dimming them from 0% - 100%. The R+ array contains the 630nm and 660nm wavelengths while the NIR+ contains the 810nm, 830nm, 850nm and 1060nm wavelengths. The blue/480nm LEDs are separately controlled on their own and they can be deactivated if you wish without affecting the rest of the LEDs.

Very first and foremost, we should state that from a scientific basis, there is zero need to ever control an individual wavelength within a red or NIR group. Zero. The newer concept of some lights with this ability is purely a useless marketing gimmick that has no real world benefit or scientific basis whatsoever. This is because individual wavelengths within a group do not accomplish a particular effect while another close to it does not, but rather all of the frequencies work together in a synergistic manner to achieve the desired therapeutic effect. The entire concept of red/NIR light therapy is to emit a spectral output that adheres as closely to the body's own rate of spectral absorption or what is know as the "coefficient of spectral absorption". This is why our ratio of frequencies/LEDs used is a very precise science and is one that only PlatinumLED has understood and mastered for many years as the pioneers and leaders of the industry. This is one part of the secret to the amazing results that only our lights achieve!

First and foremost, it's important to note that LEDs are not rated by "wattage" but rather the physical size in millimeters of the internal diode. We use only ultra high quality 42mm - 45mm single chip LEDs in all of our lights as these have been proven to be the most powerful, efficient design possible.

Any seller that claims or uses the term "5w" to describe their LEDS should be immediately discredited. This is a misleading, fabricated terminology and claim that sellers of cheap, imitation lights use in an attempt to mislead consumers. All human therapy lights that are produced on the market today - which are basically an attempted copy of our original BIOMAX lights but with inferior components - all use the same, exact size of LED housing and this is why they all look similar. Some of these same housings have recently been adapted to use two, very small chips inside of the same housing and these are now "dual chip" LEDs. These LEDs do not provide superior output as the combined output of these very small chips does not equal the output of a single, high power chip.

However, the quality of the LED used just as importantly the internal circuits used to drive these LEDs as well as the overall wattage being given to the LEDs is what dictates the strength of output. It is these factors that provide the proven superior output of PlatinumLED lights over all other devices.

So, why do certain sellers use the term "5w"? For many years, the size of 40mm - 45mm LEDs that are now commonly used in all LED therapy lights were termed as "3w" LEDs as this was roughly the maximum amount of power that could be drawn through them before failing. This was their "maximum" wattage, even though they were never ran at this maximum capacity. When PlatinumLED created the first high power LED based human therapy light in 2014, we termed our LEDs "3w" as this is what they were commonly known as.

As the industry grew, competitors entered the marketplace with attempted copies of our original design using cheaper components. In an attempt to break into the industry, some competitors had the idea to claim that they were using "5w" LEDs in order to sound superior. The reality was that they were NOT using "5w" LEDs, but rather the same, exact size of LEDs that we were. The customer however had no way of knowing the difference so that lie grew to other resellers of products also falsely claiming "5w" LEDs. All of this; however, was and is a complete marketing lie invented only to mislead the public.

There are no LED based human therapy lights being sold that contain an LED with a 5w maximum capacity. Any seller that claims this should be immediately discredited.

Be very, very careful with the internet these days and unscrupulous sellers of electronics that use fabricated marketing terms and claims!

We do not and will never produce oversized, single panels as they are an absolute disaster and highly inferior to our modular design. Oversize panels are impossible to ship via normal methods due to their size and weight not only which makes any warranty service for you the consumer, impossible but they are frequently damaged in transit because of this. These pop-up companies that sell them typically abandon their customers when their panels eventually break for this reason. These types of panels are also very prone to overheating and other problems due to their inferior design. On top of all of this, they do not even produce the output power or advanced spectrum that our panels produce. YES, we offer a highly superior full body solution in the form of our modular system consisting of a 2x or 4x light package. Please contact us directly for any assistance with this!

Dual-chip LEDs, which can emit two wavelengths simultaneously (such as 660nm and 850nm), are less effective because each wavelength is produced in a very small amount due to the smaller chip size. The sum of the dual chips is far below that of a single chip and thus the comparative output is inferior. This results in a light output similar to an underpowered handheld device.

Our approach is to use high-quality single-frequency LEDs to ensure powerful and effective light therapy with optimal distribution across the panel and in a perfected ratio according to the human body's own window of spectral absorption. This design provides an output and physiological response that far exceeds that of a dual-chip design.

Contrary to the marketing efforts put out by sellers of lights using these dual chips, the individual frequencies received by the body are indeed completely blended when reaching the target area ensuring this maximum physiological response. Beyond this, since all frequencies must be locked by the dual chip design, the ratio of the wavelengths used are not optimized as per the correct coefficient of spectral absorption by the human body which even further lessens the efficacy of these types of lights.

So why do they use them? Purely as a marketing gimmick to appear superior in some fashion. That's it.

There is a reason why our lights provide superior results over the 15+ years as the pioneers and leaders of ultra-high power RLT devices: because we design our products around science, not marketing gimmicks.