Deep Tissue
Designed for
Deep muscle and joint support.
Settings
Red and NIR light at 100% power.
Duration
20-minute treatment cycle.
50% more powerful for faster results—now with advanced wavelength customization for targeted therapeutic benefits.
1/
Get 50% more light output compared to previous BIOMAX models. More irradiance means more benefits in shorter sessions.
50%
More output than standard models.
Reduce
Treatment time by 10+ minutes.
Increase
All therapeutic benefits.
02/
Individually adjust all 7 therapeutic wavelengths.
Pinpoint and support targeted healing.
Save custom profiles to onboard memory.
03/
Adjustable 0–999Hz frequency control.
Selectable flicker-free or pulsed output.
One-touch activation.
04/
Further enhance your total body coverage while maximizing results with our revolutionary zero gap design. This eliminates any dead spots between panels and creates a seamless LED array for perfected treatment.
Maximized light coverage.
Optimal treatment area utilization.
Enhanced therapeutic efficiency.
06/
Control every aspect of your treatment through an intuitive digital interface. The included BIOMAX PRO remote provides instant control of your light as well as access to your pre-set settings, spectrum and voice functions
Multiple light control.
Timer settings activation.
Pre-set smart modes.
Custom protocol activation.
Dimensions
Weight
Power Consumption
Treatment Area
Number of LEDs
Max Heat Rating
Warranty
Rated Lifespan
EMF Emission
19” x 9” x 3”
11 lbs
Low Power: Amps @110v:1.3A / Amps @220v:0.6A / 149 Watts
High Power:
Amps @110v:2.30A / Amps @220v:1.1A / 262 Watts
See chart
144
130 F / 55 C
3 Years
100,000 hrs
0.0 µT @ 4”
19” x 12” x 3”
15 lbs
Low Power:
Amps @110v:1.7A / Amps @220v:0.9A / 202 Watts
High Power:
Amps @110v:3.2A / Amps @220v:1.60A / 386 Watts
See chart
216
130 F / 55 C
3 Years
100,000 hrs
0.0 µT @ 4”
36” x 9” x 3”
22 lbs
Low Power:
Amps @110v:2.4A / Amps @220v:1.2A / 279 Watts
High Power:
Amps @110v:4.3A / Amps @220v:2.2A / 509 Watts
See chart
288
130 F / 55 C
3 Years
100,000 hrs
0.0 µT @ 4”
36” x 12” x 3”
29 lbs
Low Power:
Amps @110v:3.3A / Amps @220v:1.6A / 389 Watts
High Power:
Amps @110v:6.7A / Amps @220v:3.3A / 793 Watts
See chart
432
130 F / 55 C
3 Years
100,000 hrs
0.0 µT @ 4”
BIOMAX PRO Series Intensity
LED Therapy Light
Eye Protection
Door Hook
Power Cable
Patch Cable
Screw x6
Cable Assembly & Snap Links
Remote Control
Wrench
Hanging Bracket 1
Hanging Bracket 2
Triangle Hook
The BIOMAX PRO has five main upgrades: 50% more light energy emitted (shorter treatment times/higher power), "zero-gap" construction which eliminates the gap between multiple panels, individual wavelength control, adjustable pulse output control and the addition of Intelligent Smart Mode pre-sets. Same industry leading, medical-grade quality, just massively more powerful and precise. The BIOMAX PRO Is the most powerful and advanced human therapy light ever created with unique, revolutionary design.
Yes. The 50% power increase means your cells receive more therapeutic light energy in less time.
Here's the math:
That's 2.5 full days of time given back to you per year.
Quick answer: We include this feature for our customers that wish to utilize it in order to give them the power to use their light as they wish.
We continue to view pulsing as an add-on with no proven therapeutic benefit in LED-based human therapy lights. The only factors that determine effectiveness are output power and spectrum—areas where our lights are superior to all others.
For best results, we recommend running our lights without
pulsing. That said, we added the pulsing feature to the NIR lights on our
BIOMAX Pro units due to customer demand for those who wish to experiment. We are simply giving our customers the ability to use the BIOMAX PRO in any manner that they wish.
Please refer to the following article for information on Pulsing
LEDs: Pulsed
Light Therapy: Beneficial or Bogus?
Quick answer: Single chip LEDs are superior to dual-chip/multi-chip LEDs in every aspect.
Dual-chip or multi-chip LEDs , which can emit two or four wavelengths simultaneously (such as 660nm and 850nm), are less effective because each wavelength is produced in a very small amount due to the smaller chip size. The sum of the dual chips is far below that of a single chip and thus the comparative output is inferior. A dual/multi-chip LEDs is not as powerful as a superior single chip LED.
Our approach is to use high-quality single-frequency LEDs to ensure powerful and effective light therapy with optimal distribution across the panel and in a perfected ratio according to the bodies window of spectral absorption. This design provides an output and physiological response that far exceeds that of a dual-chip design.
Contrary to the marketing efforts put out by sellers of lights using these dual chips, the individual frequencies received by the body are indeed completely blended when reaching the target area ensuring this maximum physiological response. Beyond this, since all frequencies must be locked by the dual chip design, the ratio of the wavelengths used are impossible to be optimized as per the correct coefficient of spectral absorption by the human body which even further lessens the efficacy of these types of lights. The simple reason that makers of these lights utilize an even blend of wavelengths is not science based but rather a mathematical requirement of the dual/multi-chip design.
So why do they use them? Purely as a marketing gimmick to appear superior in some fashion. That's it. 2 or 4 is better than 1, right? No, it's not.
There is a reason why our lights provide superior results over the 15+ years as the pioneers and leaders of ultra-high power RLT devices: because we design our products around science, not marketing gimmicks.
Quick answer: We create our lights based on science, not hype.
All of our BIOMAX and BIOMAX Pro models include our patent pending R+ | NIR + spectral output
featuring the seven wavelengths of 480nm /630nm /660nm/ 810nm /830nm/850nm/1060nm. Please check out the following article for more information on our spectrum and the percentages of each wavelength: R+ |
NIR+: THE MOST ADVANCED LED THERAPY LIGHT SPECTRUM
This spectral output is perfected for human therapy use as the
entire science of human therapy lights is emitting a spectral output that
matches as close as possible to the body's own coefficient of spectral
absorption. By efficiently emitting as close as possible to what the body
will absorb within the studied therapeutic "action zones", we're able
to maximize the production of ATP and mitochondrial stimulation. This is
the science of red/NIR light therapy.
The peak absorption of the human body is at 660nm and 850nm to achieve our desired physiological affects. Around these peaks is a curve downwards of lessening absorption as the wavelengths go farther from the peak. The power of spectral output is to emit a combined spectrum that adheres to this principal of peak emission with lessening levels of lower frequencies.
This is precisely why other human therapy lights that emit a spectral output with all wavelengths being even are inferior as they are not science based. Alternatively, this is also one reason why PlatinumLED lights are the highest performing human therapy lights available on the market today.
Yes. All BIOMAX Pro models qualify for HSA/FSA payment through Sika Health, our HSA/FSA payment provider. To do this, simply select Sika as your payment provider upon checkout and they will walk you through the process. If you do not see Sika listed as an available payment provider in the USA, please ensure that you are not auto-logged in to Shop Pay and if so, please click the "Check out as a guest" link at the bottom of the payment screen to logout and view all providers.